Nampa Time
You Are Visitor   

Hartman Inc Custom Setup Instructions

Keep this in your files. You will need this information if you need to call me (FOR Toms HELP )

CCs Model Altitude Rider Weight

PRIMARY CLUTCH Controls RPM Track Pipes

  1. Primary Spring

  2. Our Shims

  3. Weights

  4. Rivets

RPM

  1. Engagement

  2. Shift

NOTE:

SECONDARY CLUTCH Controls Upshift and Backshift

  1. Helix

  2. Spring Color

  3. Spring Setting

  4. Belt

NOTE: 8DN Belt is very hard and slips (Big loss of performance)

We use Carlisle XS-805 Belts. (Less slip with more performance Big H.P. XS-805

MOTOR ALIGNMENT

  1. Sheave Center to Center mm 2. Sheave Offset mm Check Motor Stop

NOTE:

GEARING AND TRACK

NOTE:

CARBURETORS 1. PTO 2. 3. MAG 4.

  1. Main Jets ______________ ________

  2. Pilots ______________ ________

  3. Needles ______________ ________

  4. Fuel Screws ­­­­­­­­­­­­­­­______________ ________

  5. Air Jets _______________ ______________ ______________ ________

Custom_Setup_Instructions__1

Note 2.5 Ball Allen tool is needed

There are a number of variables. We are not responsible for burn downs. OIL PUMP ADJUSTMENT: Cable Adjust to Factory specifications. Note. If you shorten cable less oil used. Use 3 oz of oil per 1 gallon of gas use. www.hartmaninc.com 208-468-1073